-16%

Lubrina 2 Automatic Handpiece Lubrication System - Image 1

Lubrina 2 Automatic Handpiece Lubrication System - Image 2

Click to enlarge

Lubrina 2 Automatic Handpiece Lubrication System

Lubrina 2 Automatic Handpiece Lubrication System

Original price was: $5,077.41.Current price is: $4,289.99.

0 days 00 hr 00 min 00 sc

Brand	Lubrina 2
Manufacturers	J. Morita
Vendors	Dental We Fix Inc.

Available on backorder

Add to compare

Add to wishlist

SKU: JM-24K325ENG Categories: Anesthetic needles, Anesthetics Products, Dental Supplies

Dental We Fix Inc.

Medicom DentiCare Swivel Prophy Angles Antisplatter DPA Tapered Brush White Original price was: $207.99.Current price is: $206.99.
Medicom DentiCare Swivel Prophy Angles Antisplatter DPA Firm Cup White Original price was: $137.99.Current price is: $132.99.
Medicom DentiCare Swivel Prophy Angles Antisplatter DPA Soft Cup Grey Original price was: $137.99.Current price is: $132.99.
J Morita TorqTech Attachments $799.99 – $1,749.99
Root ZX II OTR Module Original price was: $2,482.24.Current price is: $2,099.99.

Description

Lubrina 2 automatically performs maintenance (lubrication and cleaning) of handpieces and other equipment which are essential for daily practice. Because the lubrication amount and service time suitable for each handpiece are programmed into Lubrina 2, it can automatically perform maintenance of up to four handpieces in a short time. The clean air-blow system implements lubrication and cleaning of the inside of the handpiece thoroughly, and provides stable maintenance without variations by staff which can occur during manual lubrication. Lubrina 2 accepts multiple brands of spray lubricant.

Highlights:

Automatic purging and lubrication of a wide variety of equipment
New clean air-blow system
Reduced maintenance time and oil consumption
Up to 4 handpieces/attachments may be cleaned in the same cycle
Built-in chuck maintenance system for MORITA instruments
Compatible with 4-hole, 5-hole, and 6-pin connections
Unique dual lubrication system

Features:

Seamless Auto-Maintenance:

Cleans one turbine in approximately 20 seconds
Oil usage amount is reduced to 1/4
Faster maintenance with excellent cost savings

Since the air-blow system can remove residual water completely using clean air, the efficiency of lubrication is enhanced with oil usage only 1/4 of that compared to manual lubrication. Daily maintenance cost is therefore reduced. In addition, the system can remove surplus oil effectively, allowing maintenance in a short time¹.

Handpiece and spray compatibility

Example: One turbine and contra angle by Morita and one turbine and contra angle by another manufacturer.

By replacing the coupling, Lubrina 2 facilitates the maintenance of Tri Auto ZX2 and Root ZX II contra angles, air driven handpieces (ISO 9168/Type 3 joint) as well as all other contra-angles and straight handpieces (ISO 3964/E-Type joint). Lubrina is compatible with 4-hole, 5-hole, and 6-pin connections. With its dual lubrication system, one or two different brands of spray may be used in the same cycle. Several brands of spray are compatible by using an optional spray holder adapter.

¹Comparison with the long mode of our previous Lubrina

²Approximately 40 seconds for contra-angle handpiece

Clean Air-Blow System & Other Ease of Use Features

Double-conduit design achieves clean air

By employing the dual solenoid valves and clean air dedicated conduit, the system can supply clean air without a mix of oil. During the water removal process before lubrication, the system removes the water in the head which maximizes lubrication results. During idling after lubrication, the surplus oil can be effectively removed by clean air.

Comparision of Lubrina 2 with an conventional product

Lubrina 2 (Clean Air-Blow System)

Conventional product*

Additional benefits and ease of use features of Lubrina 2

Easy chuck maintenance

For the turbine and 5x speed contra-angle handpiece, it is essential to lubricate and clean the chuck which holds the bar.

Water removal during autoclaving

If autoclave is performed while a large amount of water is left in the conduit of the handpiece, steam will not infiltrate and could cause a sterilization defect. To prevent this, clean air (without a mix of oil) is fed into the water feed, chip air conduit to remove the residual water, thereby reducing the possibility of a problem during autoclaving.

Surplus oil removal reduces idling time before practice

During handpiece rotation, clean air removes the surplus oil which causes blow-out, and thus reduces the idling time necessary before use.

Reduces scattering of oil mist

The built-in oil mist suction mechanism draws in the oil mist generated during maintenance, thereby preventing the mist from scattering to nearby surfaces and devices. In addition, since oil mist is collected into the oil gathering tray, maintenance of the equipment is also easy.

Reduced operating sound

Lubrina 2 of fers a noise reduction of 15dB during operation compared to the original model.

Easy maintenance

The control panel is flat and the front door can be removed for easy access and cleaning.

Oil spray can delivery system

The low viscosity oil mist penetrates into the inside of the handpiece head and delivers intense cleaning.

Shipping

Shipping States: Alberta (Canada), British Columbia (Canada), Manitoba (Canada), New Brunswick (Canada), Newfoundland and Labrador (Canada), Northwest Territories (Canada), Nova Scotia (Canada), Nunavut (Canada), Ontario (Canada), Prince Edward Island (Canada), Quebec (Canada), Saskatchewan (Canada), Yukon Territory (Canada)

Shipping Policy

Orders under $300 are subject to a $20 shipping fee. All orders over $300 will qualify for free shipping within most major centers in Canada.

Shipments to remote areas may be subject to additional shipping charges as specified.

Orders below $300 will be subject to the listed shipping rate.

**Free shipping unavailable to NWT, Yukon and Nunavut.**

Newfoundland and Labrador 5 business days
Nova Scotia, PEI, New Brunswick, Manitoba- 3 business days
Quebec, Ontario -1 business day
Saskatchewan, Alberta - 4 business days
British Columbia – 5 business days
NWT – 6 business days
Yukon – 6 business days
Nunavut – 18 calendar days

Additional Charges:

Temperature controlled Shipping - $20.00
Liquid Shipping/Hazardous Items - $10
Heavy Items Shipping – $10 or $20 Heavy Shipping – $10

Refund Policy

All returns must be sent back within 15 days in a re-saleable condition or a 20% re-stocking fee will be charged.

Vendor Info